|
The UltraTile provides peace of
mind by protecting and enhancing any home
or commercial property.
Re-roofing: The
UltraTile can be installed over an existing
roof quickly and efficiently, vastly reducing
the time needed to remodel a building.
The low maintenance,
durability, strength and aesthetic qualities
of the product are all contributory factors
in making Britmet's UltraTile a first
choice in tile effect lightweight roofing.
Colour: UltraTiles
are available in four superb colours,
Titanium Grey, Bramble Brown, Tartan Green
and Rustic Terracotta. |
The
UltraTile panel consists of a galvanised
steel sheet, profiled and granule coated
to give the appearance of conventional
clay or concrete roof tiles. Each panel
is one tile deep and eight tiles wide,
making it quick and easy to install. The
product offers many advantages over traditional
roofing materials including low maintenance
and good durability but at a fraction
of the weight, allowing considerable cost
savings to be made in both reduced roof
structure and load bearing requirements.
An UltraTile roof weighs only 7kg (0.5mm
gauge) to 11kg (0.9mm gauge) per square
metres which, when compared to conventional
concrete tiles, is only one-sixth of the
weight.
In stock.
Advantages:
| |
·
Designed to give a traditional
tile appearance.
· Weighing less than one-sixth
the weight of natural tiles.
· Can be used on roof pitches
from 10 degrees to vertical.
· Suitable for all roof shapes.
· Good vandal resistance.
· Easy to handle.
· Cost effective due to savings
made on timber roof structure.
· Speed of fixing is increased
thus reducing labour costs.
· Unlike conventional materials,
the UltraTile is virtually maintenance
free.
· Carries similar acoustic
qualities to traditional materials.
· Extensive range of accessories
and flashings available.
· Full technical support
available.
|
Performance:
Overall
width: 1308mm
Cover width:
1248mm
Side lap: 60mm
Step: 22mm
Batten
gauge (0.45mm): 365mm
Batten
gauge (0.9mm): 363mm
Individual
tile pitch: 156mm
|
Thickness
(mm) |
Weight
Per M2
(kg) |
Tiles
Per m2 |
Coverage
Per Tile
Panel
(m2) |
Minimum
Pitch |
0.5 |
7 |
2.18 |
0.46 |
10° |
0.9 |
11 |
2.18 |
0.46 |
10° |
|
Roof cover
per tile panel: 0.46m2
Tile
panels per m2: 2.18
Gauge
of galvanised steel: 0.45mm
& 0.9mm
Weight as laid
per m2: 7kg & 11kg
Base
coat: Acrylic resinTop coat:
Stone granules with clear acrylic
overglaze.
Colours available:
Titanium Grey, Tartan Green, Rustic
Terracotta, Bramble Brown
Chemical
resistance: Unaffected by normal
pollution
Biological resistance:
Non toxic fungicide incorporated
Fire resistance: AA classification
equal to traditional roof tiles
and slates
Fixings: The
contractor shall utilise the roofing
manufacturers recommended fixings
and sealant
Roof and ventilation
accessories: The contractor
shall utilise the roofing manufacturers
recommended ridge, Valley, hip,
eaves and ventilation accessories
in accordance with the building
regulations section F2.
Underlay:
Approved reinforced felt to BS747
type 1F. |
|
Roofing
